CHUCK REPAIRS

In the past SIR has served countless customers in the United States repairing CNC workholding equipment such as ROHM, SMW/Autoblok, Cushman, Buck Forkardt, Kitagawa and many others. SIR is an authorized distributor for ROHM, SMW/Autoblok, Schunck and Strong.
What repairs can be accomplished on this type of equipment? Most repairs that are needed we find are due to a lack of lubrication or simply old age. Air leaks and loss of clamping force are usually caused by pitting, gauling and corrosion.
At SIR we can stop these problems by grinding, hard chroming and regrinding all sealing surfaces. Chrome is a harder substance that does not corrode or pit, this in turn, will give you a longer lasting seal area.
Another problem you may be experiencing is a loss of concentricity (not clamping center). which can be caused by usage and a lack of lubrication. This can be repaired by replacing or repairing the master jaws and wedge. The repair process is effective on all types of workholding including chucks (power, manual, indexing, compensating, and self-contained), steady rests (hydraulic and pneumatic), hydraulic actuating cylinders, hydraulic clamping devices.
SIR has complete machine shop facilities, such a complete grinding (OD and ID), horizontal and vertical milling, large capacity lathes, boring, spline and gear hobbing and all types of welding on ferrous and non-ferrous metals.
With any repair that is needed we offer matched Manufacturer’s warranty. In most cases we can save your company up to 50% of replacement cost, with a responsive turnaround time.

One Stop Repair Shop!

AHD
ASI
Atlas
ATS
SMW Autoblok
Ball
Bergman
Forkardt
Fuji
Flex-e-on
Gamet
Giddings and Lewis
Gisholt
Goss
Hardinge
Hitachi
Howa
ITW Workholding
Kalamazoo
Kametsu
Kitagawa
Logansport
Magnalock
Matsumoto
Mazak
Mori Seiki
NA Woodworth
New Britain
Nikko
Nobel
Schunk
Skinner
SP Sheffer
SP
SMW Systems
Strong
Suburban
Technomors
Ward
Warner & Swasey
Woodworth
Yuasa

CHUCK REPAIRS

In the past SIR has served countless customers in the United States repairing CNC workholding equipment such as ROHM, SMW/Autoblok, Cushman, Buck Forkardt, Kitagawa and many others. SIR is an authorized distributor for ROHM, SMW/Autoblok, Schunck and Strong.
What repairs can be accomplished on this type of equipment? Most repairs that are needed we find are due to a lack of lubrication or simply old age. Air leaks and loss of clamping force are usually caused by pitting, gauling and corrosion.
At SIR we can stop these problems by grinding, hard chroming and regrinding all sealing surfaces. Chrome is a harder substance that does not corrode or pit, this in turn, will give you a longer lasting seal area.
Another problem you may be experiencing is a loss of concentricity (not clamping center). which can be caused by usage and a lack of lubrication. This can be repaired by replacing or repairing the master jaws and wedge. The repair process is effective on all types of workholding including chucks (power, manual, indexing, compensating, and self-contained), steady rests (hydraulic and pneumatic), hydraulic actuating cylinders, hydraulic clamping devices.
SIR has complete machine shop facilities, such a complete grinding (OD and ID), horizontal and vertical milling, large capacity lathes, boring, spline and gear hobbing and all types of welding on ferrous and non-ferrous metals.
With any repair that is needed we offer matched Manufacturer’s warranty. In most cases we can save your company up to 50% of replacement cost, with a responsive turnaround time. We resolve these issues by replacing with our stock inventory as well.

One Stop Repair Shop!

Brands We Service:

AHD, ASI, Atlas, ATS, SMW Autoblok, Ball, Bergman, Forkardt, Fuji, Flex-e-on, Gamet, Giddings and Lewis, Gisholt, Goss, Hardinge, Hitachi, Howa, ITW Workholding, Kalamazoo, Kametsu, Kitagawa, Logansport, Magnalock, Matsumoto, Mazak, Mori Seiki, NA Woodworth, New Britain, Nikko, Nobel, Schunk, Skinner, SP Sheffer, SP, SMW Systems, Strong, Suburban, Technomors, WardWarner & Swasey, Woodworth, Yuasa

rohm_lve_neu